LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6
LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 is a direct-fit replacement sensor priced at $14.63. Designed for V6 engines, it restores accurate throttle response and fuel efficiency in Ford, Mazda, and Mercury models from 1996–2009 with matching 8th VIN digit specifications.
● In stock
Buy at Lab Work Auto →Price and availability may change. Click to see current details on Lab Work Auto.
Key features
- Direct-fit replacement for 3.0L and 4.0L V6 engines
- Compatible with Ford, Mazda, Mercury models 1996-2009
- Matches 8th VIN digit for accurate fitment
- No programming or calibration required
- Resists heat, vibration, and underhood stress
- Restores smooth acceleration and idle control
- OEM-equivalent design for reliable performance
Pros
- +Affordable at $14.63
- +Wide compatibility across multiple brands
- +Easy bolt-on installation
- +Improves fuel economy and throttle response
- +Durable construction for engine bay conditions
Cons
- −Only fits specific VIN-coded models
- −Limited to 3.0L and 4.0L V6 engines
- −Not compatible with V8 or newer models
About LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6
What is LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6?
The LABWORK TPS Throttle Position Sensor is an OEM-spec replacement part that monitors throttle valve angle in 3.0L and 4.0L V6 engines from 1996 to 2009. Compatible with select Ford, Mazda, and Mercury vehicles including Ranger, Escape, Explorer, B4000, and Tribute, it ensures precise air-fuel mixture and correct transmission shift timing. This sensor directly replaces worn or faulty units without requiring programming or calibration, making it ideal for DIY mechanics restoring engine performance.
Key features
- Direct-Fit Replacement — Matches OEM specifications for seamless installation on compatible V6 engines.
- VIN-Specific Compatibility — Designed to fit models with matching 8th VIN digit codes for accurate pairing.
- No Programming Needed — Installs and operates immediately without ECU recalibration.
- Heat and Vibration Resistant — Built to withstand underhood conditions in trucks and SUVs.
- Restores Throttle Response — Improves acceleration and idle stability when replacing failing sensors.
- OEM-Equivalent Design — Ensures reliable fit and function in Ford, Mazda, and Mercury applications.
- Affordable Performance — Offers reliable replacement at a fraction of dealership part costs.
Who is LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 for?
This throttle position sensor suits DIY auto repairers maintaining older Ford, Mazda, or Mercury V6 vehicles between 1996 and 2009. It’s ideal for those experiencing rough idling, poor acceleration, or check engine lights linked to TPS failure. Mechanics seeking a cost-effective, bolt-on solution without specialized tools will benefit most. It's not intended for V8 engines or models outside the specified VIN and year ranges.
How does LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 compare?
Compared to standard aftermarket TPS units, the LABWORK sensor offers VIN-specific compatibility for greater accuracy and fitment confidence. Unlike some budget sensors that may require calibration or suffer premature failure, this unit installs directly and resists heat and vibration. It matches OEM performance at a lower cost than dealership replacements, making it a balanced choice for reliability and affordability in older V6 trucks and SUVs.
Best use cases
- →Replacing failing TPS in Ford Ranger 3.0L
- →Fixing rough idle in Mazda B4000 4.0L
- →Restoring acceleration in Ford Escape V6
- →DIY repair on Mercury Mountaineer 4.0L
- →Solving check engine light due to TPS fault
Is LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 right for you?
Buy the LABWORK TPS sensor if you own a 1996–2009 Ford, Mazda, or Mercury V6 vehicle showing throttle response issues. Ideal for DIYers with basic tools and mechanical knowledge. Confirm your 8th VIN digit matches listed specs. Consider OEM dealerships or higher-end aftermarket brands if seeking extended warranty coverage, but this offers reliable performance at a low price point.
How it compares: Compared to generic TPS sensors, LABWORK offers VIN-specific fitment and OEM-level accuracy. It outperforms low-cost imports in durability and installs easier than units requiring calibration, making it a smarter choice for older V6 trucks and SUVs.
More from Lab Work Auto
#63P-81950-00-00 TRIM RELAY For YAMAHA OUTBOARD F150 & 250 Part
$17.80
(4 pcs) For Ford F-150 Bed Interface Plates Standard Tie Down FL3Z9928408AB
$16.82
-6 An X 5/16-24 O Ring Hydroboost Spittier/Return Port Fitting Car Accessories
$8.20
-6AN AN6 Fuel Adapter Fitting to 3/8 Quick Connect LS W/ Clip Female Black GM
$7.91Frequently Asked Questions
What vehicles fit the LABWORK TPS Throttle Position Sensor?
▾
It fits select 1996–2009 Ford, Mazda, and Mercury models with 3.0L or 4.0L V6 engines. Confirm compatibility using the 8th digit of your VIN, which must match specified codes like E, U, K, or V.
Does the LABWORK TPS require programming after installation?
▾
No, this throttle position sensor does not require programming or calibration. It installs as a direct replacement and works immediately upon connection, making it ideal for DIY repairs.
How do I know if my TPS is failing?
▾
Symptoms include rough idle, hesitation during acceleration, sudden surges, or a check engine light with TPS-related codes. Replacing the sensor can restore smooth engine performance.
Is the LABWORK TPS made to OEM specifications?
▾
Yes, it's built to OEM-equivalent design standards for accurate fit, function, and durability. It matches original sensor performance without the dealership price tag.
Can I install the LABWORK TPS myself?
▾
Yes, most DIYers can install it with basic hand tools. The process typically takes under an hour and involves removing the old sensor and mounting the new one on the throttle body.
How much does LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 cost?
▾
LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 is $14.63 at Lab Work Auto. Prices may change — click through to Lab Work Auto for the latest.
Is LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 in stock at Lab Work Auto?
▾
Yes, LABWORK TPS Throttle Position Sensor For Mazda Ford Ranger Mercury 3.0L 4.0L V6 is currently in stock at Lab Work Auto.
Specifications
- SKU
- F7-3976