labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm
labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm is a $80 stainless steel exhaust cutout kit with remote-controlled electric valve for enhanced exhaust sound and performance. Ideal for enthusiasts seeking on-demand aggressive tone without permanent exhaust modifications.
● In stock
Buy at Lab Work Auto →Price and availability may change. Click to see current details on Lab Work Auto.
Key features
- Electric remote-controlled valve for instant sound control
- T-304 stainless steel for corrosion and heat resistance
- 63mm (2.5-inch) diameter for high-flow performance
- Includes 12ft wiring harness and toggle switch
- Complete hardware: flange, clamp, gaskets, bolts
- 45-degree stainless steel elbow dump pipe
- Computerized mandrel-bent piping for strength
Pros
- +Durable stainless steel construction
- +On-demand aggressive exhaust sound
- +Complete kit with essential hardware
- +Remote control via toggle switch
- +Professional-grade fit and finish
Cons
- −No installation instructions included
- −Professional installation required
- −California Proposition 65 warning applies
- −Compatibility requires manual verification
About labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm
What is labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm?
The labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm is a performance exhaust upgrade that allows drivers to control exhaust flow and sound at the flip of a switch. Built with durable T-304 stainless steel, this 63mm (2.5-inch) system includes a gear-driven electric motor that operates a valve to open or close the exhaust path, enabling a deep, aggressive tone when open and a quieter ride when closed. Designed for integration into existing exhaust setups, it's commonly installed between the downpipe and catback system for maximum sound impact.
Key features
- Electric Valve Control — Toggle exhaust sound remotely with included switch and 12ft wiring harness.
- T-304 Stainless Steel Construction — Resists corrosion and withstands high exhaust temperatures.
- 63mm (2.5-inch) Diameter — Matches common performance exhaust systems for seamless fit.
- Complete Hardware Kit — Includes flange adaptor, V-band clamp, gaskets, bolts, and Y-pipe for installation.
- 45-Degree Elbow Dump Pipe — Facilitates clean routing and optimal exhaust exit angle.
- Computerized Mandrel Bends — Ensures smooth airflow and structural integrity.
- No Instructions Included — Professional installation is highly recommended.
Who is labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm for?
This product is ideal for automotive enthusiasts who want customizable exhaust sound without swapping the entire system. It suits DIYers with advanced mechanical skills or professionals upgrading street or track vehicles. It's especially popular in tuner, muscle car, and import performance communities where sound control and aesthetics matter.
How does labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm compare?
Compared to standard polypropylene or fiberglass mufflers, this stainless steel cutout offers superior durability and a more aggressive acoustic profile. Unlike fixed exhaust systems, the electric valve provides flexibility. It’s more affordable than full valved exhaust systems but requires more integration effort than bolt-on mufflers. It outperforms basic cutouts with manual cables due to its gear-driven motor reliability.
Best use cases
- →Custom exhaust sound tuning for street cars
- →Track-day vehicles needing quiet mode
- →Muscle car or tuner sound enhancement
- →Aftermarket exhaust system integration
- →Temporary sound modification solution
Is labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm right for you?
This cutout valve is best for experienced DIY mechanics or professionals upgrading performance exhausts. Verify your exhaust inlet measures 63mm before purchase. Ideal for those wanting customizable sound without replacing the full system. Consider a full valved exhaust if you lack installation experience. Always check local noise and emissions regulations.
How it compares: Compared to basic manual cutouts, this electric version offers easier, more reliable operation. It's less expensive than full valved exhaust systems but requires more integration work than drop-in mufflers.
More from Lab Work Auto
#63P-81950-00-00 TRIM RELAY For YAMAHA OUTBOARD F150 & 250 Part
$17.80
(4 pcs) For Ford F-150 Bed Interface Plates Standard Tie Down FL3Z9928408AB
$16.82
-6 An X 5/16-24 O Ring Hydroboost Spittier/Return Port Fitting Car Accessories
$8.20
-6AN AN6 Fuel Adapter Fitting to 3/8 Quick Connect LS W/ Clip Female Black GM
$7.91Frequently Asked Questions
What is the purpose of an electric exhaust cutout?
▾
An electric exhaust cutout allows you to control exhaust sound and backpressure by opening or closing a valve in the exhaust system. It lets you switch between a quiet daily mode and an aggressive performance sound with a toggle switch.
Does this kit fit all vehicles?
▾
No, compatibility depends on your exhaust system's inlet size and layout. This kit is designed for 63mm (2.5-inch) exhausts. Always measure your exhaust before buying and check the compatibility spreadsheet provided by the seller.
How is the valve powered and controlled?
▾
The valve is powered by a 12V system and controlled via a toggle switch included in the kit. It uses a gear-driven motor and comes with a 12ft wiring harness for flexible installation.
Is professional installation required?
▾
Yes, professional installation is highly recommended. The kit includes no instructions and requires welding or precise exhaust system modification for proper integration and leak-free performance.
Can this cutout be used daily?
▾
Yes, when closed, the cutout allows for quieter daily driving. When open, it delivers a louder, more aggressive exhaust note. Just ensure it's installed correctly to avoid leaks or drone during regular use.
How much does labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm cost?
▾
labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm is $80.00 at Lab Work Auto. Prices may change — click through to Lab Work Auto for the latest.
Is labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm in stock at Lab Work Auto?
▾
Yes, labwork 2.5Remote Electric Exhaust Catback Downpipe Cutout E-Cut Out Valve 63mm is currently in stock at Lab Work Auto.
Specifications
- SKU
- F8-016482