For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger
For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger is a direct-fit replacement set priced at $63.73. Includes both left and right arms with pre-installed ball joints. Ideal for DIY suspension repairs on 2013–2017 Nissan Versa models, offering durability and easy installation with no cutting required.
● In stock
Buy at Lab Work Auto →Price and availability may change. Click to see current details on Lab Work Auto.
Key features
- Fits 2013–2017 Nissan Versa and Versa Note
- Includes driver and passenger side arms
- Ball joints pre-installed for easy setup
- No drilling or cutting required
- Direct OEM replacement design
- Durable, wear-resistant construction
- Compatible with 2012 Versa Sedan
Pros
- +Complete pair included for full front-end refresh
- +Saves labor time with pre-attached ball joints
- +Affordable alternative to dealership parts
- +Straightforward installation with basic tools
- +Restores factory steering and alignment specs
Cons
- −Requires mechanical knowledge to install
- −Not for use on non-compatible model years
About For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger
What is For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger?
This complete front suspension kit includes both driver-side (left) and passenger-side (right) lower control arms, each with a factory-installed ball joint, designed specifically for 2013–2017 Nissan Versa sedans and 2014–2017 Versa Note models. It's engineered as a direct OEM replacement to restore steering precision and ride stability. Sold by Lab Work Auto, this set eliminates the need to source individual arms, saving time and ensuring matched pair quality. Built for reliability, it addresses common wear issues like clunking noises, uneven tire wear, and loose handling.
Key features
- Exact Fit — Compatible with 2013–2017 Nissan Versa and 2014–2017 Versa Note front suspension systems.
- Dual-Side Set — Includes both left and right lower control arms with ball joints pre-attached.
- High-Durability Build — Constructed for wear resistance and long-term performance under daily driving conditions.
- Plug-and-Play Install — No drilling or cutting needed; designed for straightforward replacement using standard tools.
- OEM Replacement — Matches original specifications for alignment and suspension geometry.
- Cost-Effective Pair — Full set priced under $65, offering savings over individual purchases.
- Verified Compatibility — Also fits 2012 Versa Sedan front lower control arm applications.
Who is For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger for?
This product suits Nissan Versa owners performing DIY suspension maintenance, especially those noticing steering wander, front-end noise, or failed ball joints. It’s ideal for budget-conscious drivers, home mechanics with intermediate skills, and repair shops seeking reliable replacement parts. The set supports safe, factory-level repairs without specialty tools.
How does For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger compare?
Compared to buying single control arms or generic suspension parts, this set offers better value and guaranteed fitment. Unlike basic steel arms prone to rust, these are built for durability. It outperforms patch repairs like ball joint presses, providing a complete, pre-assembled solution. When stacked against pricier OEM dealerships parts, it delivers similar performance at a fraction of the cost.
Best use cases
- →Replacing worn or damaged control arms
- →Fixing front-end clunking or vibration
- →Restoring alignment after impact damage
- →Upgrading from failed factory ball joints
- →Preventive suspension maintenance
Is For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger right for you?
This set is best for Nissan Versa owners with intermediate mechanical skills looking to restore front suspension performance. It’s ideal for those replacing worn arms or failed ball joints. If you have access to basic hand tools and a safe workspace, this kit allows a same-day repair. Alternatives include individual arms or dealership OEM parts, which cost more and take longer to source.
How it compares: Compared to single control arms or rebuildable joints, this set offers better value and fitment assurance. It’s more convenient than press-in ball joint kits and outperforms low-cost, non-OEM suspension parts in durability and alignment retention.
More from Lab Work Auto
#63P-81950-00-00 TRIM RELAY For YAMAHA OUTBOARD F150 & 250 Part
$17.80
(4 pcs) For Ford F-150 Bed Interface Plates Standard Tie Down FL3Z9928408AB
$16.82
-6 An X 5/16-24 O Ring Hydroboost Spittier/Return Port Fitting Car Accessories
$8.20
-6AN AN6 Fuel Adapter Fitting to 3/8 Quick Connect LS W/ Clip Female Black GM
$7.91Frequently Asked Questions
What years and models does this control arm set fit?
▾
This set fits 2013–2017 Nissan Versa sedans, 2014–2017 Versa Note models, and is also compatible with the 2012 Versa Sedan front suspension. Always verify your vehicle's exact configuration before purchase to ensure proper fit.
Does this kit include both left and right control arms?
▾
Yes, it includes both the front left (driver side) and front right (passenger side) lower control arms, each with a pre-installed ball joint. This allows for a complete front suspension refresh or simultaneous replacement.
How difficult is installation of these control arms?
▾
Installation is moderate in difficulty and requires basic mechanical tools and knowledge. You’ll need a jack, jack stands, wrenches, and possibly a ball joint separator. No drilling or cutting is required for proper fitment.
Is this a direct replacement for OEM parts?
▾
Yes, these control arms are designed as direct-fit replacements that match original equipment specifications for alignment, fit, and performance. They restore factory suspension geometry without modifications.
Can I use this kit for only one side of my car?
▾
Yes, the kit includes two arms, but you can install just one if needed. However, if one arm is worn, the other is likely near the end of its service life, so replacing both is recommended for balanced handling.
How much does For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger cost?
▾
For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger is $63.73 at Lab Work Auto. Prices may change — click through to Lab Work Auto for the latest.
Is For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger in stock at Lab Work Auto?
▾
Yes, For 13-17 Nissan Versa Front Lower Control Arm Ball Joint Driver & Passenger is currently in stock at Lab Work Auto.
Specifications
- SKU
- F8-013811