AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L
The AC Compressor Clutch KIT Plate Coil Bearing for Mazda 3 and Mazda 5 (2004-2009, 2.0L/2.3L) is a complete replacement set that includes a five-groove pulley with bearing, clutch plate hub, C-clamps, center bolt and shims, priced at $40.74, ideal for restoring cooling performance on non-turbo Mazda models.
● In stock
Buy at Lab Work Auto →Price and availability may change. Click to see current details on Lab Work Auto.
Key features
- Five-groove pulley with pre-pressed bearing – precise fit.
- Clutch plate hub machined to factory specs for reliable torque transfer.
- C-clamps secure coil and prevent slippage under load.
- Center bolt and shims provide correct axial positioning.
- Complete hardware set includes all fasteners for one-time install.
- Same-day shipping from Lab Work Auto reduces vehicle downtime.
Pros
- +All essential parts in one kit, no extra purchases needed.
- +Pre-pressed bearing saves installation time.
- +Fits both 2.0L and 2.3L non-turbo Mazda engines.
Cons
- −Only compatible with non-turbo models; turbo engines need a different kit.
- −Installation requires basic mechanical skill and proper torque tools.
About AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L
What is AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L?
The AC Compressor Clutch Kit is a full-service replacement designed for the air-conditioning compressors of Mazda 3 (model years 2004-2009) and Mazda 5 (2006-2010) equipped with 2.0-liter or 2.3-liter non-turbo engines. The kit supplies every mechanical component that wears out in the clutch assembly, eliminating the need to source individual parts. By installing the kit, the compressor’s drive belt re-engages smoothly, restoring proper refrigerant flow and preventing the characteristic whining noise of a slipping clutch.
Key features
- Five-groove pulley with bearing — bearing is pre-pressed into the pulley for precise alignment.
- Clutch plate hub — machined hub matches factory specifications for reliable torque transfer.
- C-clamps — stainless-steel clamps secure the coil and prevent slippage under load.
- Center bolt and shims — provide correct axial positioning and tension adjustment.
- Complete hardware set — includes all fasteners needed for a one-time installation.
- Same-day shipping — Lab Work Auto ships the kit the day of order, reducing vehicle downtime.
Who is AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L for?
The kit is aimed at DIY enthusiasts, independent mechanics, and service shops that service Mazda compact and midsize models. It is especially useful for owners who have noticed reduced cabin cooling, belt squeal, or clutch slippage after several years of operation. Because the kit covers both 2.0-liter and 2.3-liter engine variants, it fits the majority of non-turbo Mazda 3 and Mazda 5 vehicles produced between 2004 and 2010.
How does AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L compare?
Compared with sourcing individual components, this kit offers a guaranteed fit and eliminates compatibility guesswork. Generic aftermarket pulley-bearing combos often lack the exact groove spacing required for Mazda compressors, leading to premature wear. The integrated C-clamps and shims in this kit also reduce installation time versus separate purchases, making it a more cost-effective and reliable solution for restoring A/C performance.
Installation typically takes under an hour with basic hand tools, and the kit’s all-metal construction ensures durability through many cooling cycles. Replace the clutch kit at the first sign of A/C decline to maintain optimal cabin comfort.
Best use cases
- →Replacing a noisy A/C clutch on a 2007 Mazda 3.
- →Restoring cooling performance after compressor overhaul on a Mazda 5.
- →DIY repair of a Mazda 3 A/C system during winter service.
Is AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L right for you?
Buy this kit if you own a 2004-2009 Mazda 3 or 2006-2010 Mazda 5 with a 2.0L or 2.3L non-turbo engine and have noticed reduced cabin cooling or clutch noise. The installation requires basic hand tools and a modest amount of mechanical experience; a torque wrench and pulley puller are helpful but not mandatory. Alternatives include purchasing individual pulleys, bearings or clutch plates separately, which can be cheaper per part but increase the risk of mismatched components and longer labor time.
How it compares: Compared with generic pulley-bearing combos, this kit guarantees correct groove spacing and includes the clutch hub, C-clamps and shims, reducing part-count and installation time. Separate-part purchases may be cheaper per item but risk misalignment and extra labor, and higher chance of premature failure.
More from Lab Work Auto
#63P-81950-00-00 TRIM RELAY For YAMAHA OUTBOARD F150 & 250 Part
$17.80
(4 pcs) For Ford F-150 Bed Interface Plates Standard Tie Down FL3Z9928408AB
$16.82
-6 An X 5/16-24 O Ring Hydroboost Spittier/Return Port Fitting Car Accessories
$8.20
-6AN AN6 Fuel Adapter Fitting to 3/8 Quick Connect LS W/ Clip Female Black GM
$7.91Frequently Asked Questions
What does the AC compressor clutch kit replace on a Mazda 3 or 5?
▾
The kit replaces the entire clutch assembly of the air-conditioning compressor, including the pulley with bearing, clutch plate hub, C-clamps, center bolt and shims. By swapping the original components for the new kit, the compressor’s drive belt re-engages correctly and restores proper refrigerant circulation.
Does the kit include all hardware needed for installation?
▾
Yes. The package contains a five-groove pulley with a pre-pressed bearing, the clutch plate hub, two C-clamps, the center bolt, shims and all necessary nuts and washers. No additional parts are required unless you need to replace worn hoses or refrigerant lines.
How do I know if my Mazda needs this clutch kit?
▾
You’ll notice a loss of cooling power, a higher cabin temperature, or a squealing noise from the belt when the clutch slips. A visual inspection of the compressor shows a worn pulley or missing bearing. If any of these symptoms appear, the clutch kit is the appropriate repair.
Is this kit compatible with turbocharged Mazda engines?
▾
The kit is engineered for non-turbo Mazda 3 and Mazda 5 engines; turbocharged models use a different clutch design and require a specific kit. Installing this kit on a turbo engine could lead to improper fit and premature failure, so verify your vehicle’s engine type before purchase.
Can I install the kit myself with basic tools?
▾
If you have basic mechanical experience, a set of metric sockets, a torque wrench and a pulley puller, you can install the kit in about an hour. Follow the included instructions carefully, torque the bolts to specification, and double-check belt alignment to ensure reliable operation.
How much does AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L cost?
▾
AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L is $40.74 at Lab Work Auto. Prices may change — click through to Lab Work Auto for the latest.
Is AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L in stock at Lab Work Auto?
▾
Yes, AC Compressor Clutch KIT Plate Coil Bearing For Mazda 3 Mazda 5 04-09 2.0L 2.3L is currently in stock at Lab Work Auto.
Specifications
- SKU
- F8-011801