1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria
1pair Rear Coil Spring Spacer Lift Kit for Camaro Chevelle Impala Crown Victoria is a set of solid billet-aluminum spacers that raise the rear suspension by 1.5-3 inches. Priced at $45.81, it’s ideal for classic rear-wheel-drive GM and Ford models seeking a safe, cost-effective lift.
● In stock
Buy at Lab Work Auto →Price and availability may change. Click to see current details on Lab Work Auto.
Key features
- Billet-aluminum construction — machined from a single solid block for strength.
- Gold anodized finish — resists corrosion and road-salt damage.
- Multiple lift heights — interchangeable spacers provide 1.5-3″ of lift.
- Direct-fit design — bolts onto existing spring perch with factory hardware.
- Taller spring perch — raises top mounting point for improved safety.
- Installation guide included — step-by-step instructions for DIY or pro fit.
Pros
- +Durable billet aluminum outlasts cast alternatives.
- +Easy bolt-on installation, no welding required.
- +Cost-effective lift compared to full-spring replacements.
- +Improves rear stance while keeping original spring rates.
Cons
- −Lift limited to a maximum of 3 inches.
- −Not a replacement for worn or damaged springs.
- −Professional installation recommended for safety.
About 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria
What is 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria?
The 1pair Rear Coil Spring Spacer Lift Kit is a set of solid billet-aluminum spacers designed to sit between the rear coil spring and its perch, effectively raising the rear axle of classic rear-wheel-drive GM and Ford vehicles. Each spacer adds a fixed amount of height—typically 1.5, 2, 2.5 or 3 inches—allowing owners to achieve a modest lift without replacing the entire spring assembly.
Key features
- Billet-aluminum construction — machined from a single block for superior strength and fatigue resistance.
- Gold anodized finish — protects against corrosion, road salt and UV exposure.
- Multiple lift heights — interchangeable spacers provide 1.5-3″ of lift to match desired stance.
- Direct-fit design — bolts onto existing spring perch using factory-mounted hardware.
- Taller spring perch — raises the spring’s top mounting point for improved safety.
- Installation guide included — step-by-step instructions for DIY or professional fitment.
Who is 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria for?
This kit targets owners of classic Chevrolet and Ford models produced from the 1960s through the early 2000s, including Camaro, Chevelle, Impala, Crown Victoria, and related rear-wheel-drive platforms. It is ideal for enthusiasts seeking a safe, cost-effective lift to improve ground clearance, correct sag, or enhance the vehicle’s visual stance while retaining original spring rates.
How does 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria compare?
Compared with full-spring replacements, the spacer kit is lighter, cheaper, and requires no welding or custom spring tuning. Unlike adjustable coil-over kits, it offers a fixed lift height, which simplifies installation and reduces the chance of mis-adjustment. For drivers who need more than a 3-inch lift or want tunable ride height, a coil-over conversion may be preferable, but for most classic applications the spacer provides a reliable, straightforward upgrade. Installation typically takes under an hour with basic hand tools. After lifting the vehicle, the rear wheels are removed, the existing perch bolts are loosened, the spacer is placed, and the bolts are torqued to the manufacturer’s specification. The kit’s gold-anodized surface also adds a subtle visual accent that complements the classic look of vintage automobiles.
Best use cases
- →Raise a 1975 Camaro for better ground clearance.
- →Add lift to a 1988 Crown Victoria for smoother ride.
- →Improve stance of a 1990 Impala on show events.
- →Provide modest lift to a 1972 Chevelle for off-road use.
Is 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria right for you?
Choose this spacer kit if you own a classic rear-wheel-drive GM or Ford vehicle from the 1960s-1990s and want a modest lift without replacing the entire spring set. Installation is straightforward for DIY enthusiasts with basic hand tools, but a professional mechanic can ensure correct torque and safety. Compare against full-spring replacements or adjustable coil-over kits if you need more than a 3-inch lift or want tunable ride height.
How it compares: Spacer kits like this one offer a lighter, cheaper lift than full-spring replacements and avoid the complexity of coil-over conversions. They provide a fixed height increase, unlike adjustable kits, making them ideal for owners who want a simple, reliable raise without extensive suspension redesign.
More from Lab Work Auto
#63P-81950-00-00 TRIM RELAY For YAMAHA OUTBOARD F150 & 250 Part
$17.80
(4 pcs) For Ford F-150 Bed Interface Plates Standard Tie Down FL3Z9928408AB
$16.82
-6 An X 5/16-24 O Ring Hydroboost Spittier/Return Port Fitting Car Accessories
$8.20
-6AN AN6 Fuel Adapter Fitting to 3/8 Quick Connect LS W/ Clip Female Black GM
$7.91Frequently Asked Questions
What is the lift height provided by the 1pair Rear Coil Spring Spacer Lift Kit?
▾
The kit includes spacers that raise the rear suspension by 1.5-3 inches, depending on the selected spacer thickness. The lift is measured from the spring perch to the chassis, giving a noticeable increase in ride height while maintaining original spring rates.
Does the kit require any welding or permanent modifications?
▾
No welding is needed; the spacers bolt directly onto the existing spring perch using the factory-mounted bolts. Installation involves removing the rear wheels, loosening the perch bolts, inserting the spacer, and re-torquing to spec. This reversible method preserves the original suspension geometry.
How does the billet-aluminum material compare to cast aluminum?
▾
Billet-aluminum is machined from a single solid block, giving higher tensile strength and better fatigue resistance than cast aluminum, which can contain porosity. This results in a more durable spacer that resists cracking under heavy loads, making it suitable for performance driving and daily use.
Is professional installation required for this lift kit?
▾
While the kit is designed for DIY installation, a professional mechanic is recommended to verify bolt torque and ensure the spacer sits flush. Incorrect installation could affect handling, so owners with limited mechanical experience should consider a reliable shop service.
Can the spacers be used on both GM and Ford rear-wheel-drive models?
▾
Yes, the kit is compatible with a wide range of GM and Ford rear-wheel-drive cars from the 1960s through the early 2000s, including Camaro, Chevelle, Impala, and Crown Victoria. Always confirm fitment with the vehicle’s VIN or chassis code before purchase.
How much does 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria cost?
▾
1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria is $45.81 at Lab Work Auto. Prices may change — click through to Lab Work Auto for the latest.
Is 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria in stock at Lab Work Auto?
▾
Yes, 1pair Rear Coil Spring Spacer Lift Kit For Camaro Chevelle Impala Crown Victoria is currently in stock at Lab Work Auto.
Specifications
- SKU
- F8-013730